Jaharmi’s Irreality renewable hyperlinks with 0% transfat since 1999

I’m updating the settings for my Harmony 520 and discovered that I couldn’t change the names of activities in Harmony Remote Software v7.7.0. I am not alone, but I couldn’t find a solution. While I had the problem on Mac OS X 10.6.8, others reported problems on various other operating systems, including Microsoft Windows.

The software wouldn’t let me to change the name of more than one activity. Instead, it would let me select and highlight the text, but not edit it. It was maddening, especially when it would beep instead of accepting characters I typed.

Then, by happenstance, I clicked over to Safari to do something while I was frustrated. When I flipped back to the Harmony Remote Software, it finally accepted my typed changes.

Therefore, if you have come across this problem, try switching to another application and back to the Harmony software again.

I’m continually astounded at how aggravating the Harmony remote can be, after all the hype. I suppose it is still better than many, if not most, of the alternatives, but that isn’t saying much.

There may be times when you want to obtain the number of the latest available version — not just the latest installed version — of a software package through automated means. If the vendor or project provides a syndication feed (either RSS or Atom) that describes new releases, then you may be able to parse that data and get the newest release from it.

As an example, let’s examine the RSS feed for Group Logic’s ExtremeZ-IP. Other developers provide RSS/Atom feeds for their releases, but the EZIP feed is a good one to start a demonstration with because it is generally structured well.

We can break apart the EZIP feed with the Universal Feed Parser module for Python, which you must obtain separately.

Update: Because of Mark Pilgrim situation (also described here), the Universal Feed Parser Web site is no longer available. There is an alternative source for the Universal Feed Parser at Google Code, and I have cloned the Universal Feed Parser repository to Bitbucket from there.

As you can see, the “ExtremeZ-IP Latest Releases” feed is automatically recognized as RSS 2.0. I prefer to use HTTPS for fetching these feeds whenever possible, so if the developer has an HTTP feed, I try to see if it also works with HTTPS.

Next, let’s find out where the version numbers are kept in the feed. It looks like they are in the entry title, based on reading the feed in Safari RSS. I can confirm that with the Universal Feed Parser. We’ll want to examine the title of every feed item so we can better handle both current and future entries from the feed. There are more entries to the EZIP than I will print out.

We get Unicode strings as output from the Universal Feed Parser. That’s why the quoted strings are preceded with a “u” character.

I’d like to strip out the version string from the title element in each entry. I’m going to do so by splitting on whitespace and getting the last group of characters from the string. (This doesn’t account for text like “Hot Fix,” as seen in the EZIP feed, but it is still a good enough starting point for my purposes.)

By stripping out the build number after “x” in the version string, you potentially lose some data. In the EZIP feed, there are entries where two consecutive version numbers are the same except for the build number after the “x.” However, depending on your needs, it may still be useful to eliminate that part of the version string, so we’ll do that next.

We really only need the most current or “top” item in the feed, since that should give us the newest release number. The newest version in this particular feed should be in the first entry. That’s “entries[0]” below, because we’re using Python and it zero references the first item in lists.

There, we now have the version number of the most current release, 7.1.1, for the product. We have drawn it straight from the developer’s syndicated feed, so it is as current as the developer makes it.

How could that be useful? The output can be compared against other data, like the currently-installed version. The comparison, in turn, could be made part of a monitoring workflow, so you could get alerts if you fall behind.

If we didn’t strip the build number after the “x,” we would be left with a complex version number. Some Python tools, like distutils, will not currently handle the trailing characters in the version number well.

I have found that you can improve upon distutils’ StrictVersion/LooseVersion version number handling by switching to parse_version in pkg_rsources (“from pkg_resources import parse_version as V”). More coverage of that topic appears in PEP 386. If you are comparing the original version strings from the EZIP feed with similarly complex output from elsewhere, then I would probably use the pkg_resources module.

The McAfee DAT update 5958 was issued on April 21, 2010, and created quite a situation. Heretofore, I will remember what transpired as “the events of April 21.”

I think that someday, examining what happened would make an interesting case study in crisis management. A lot of the incident unfolded on the Internet — and on Twitter, specifically. The company even became a trending topic, as seen in this screenshot I took after lunchtime (I think around 2 PM Eastern time, although I only saved later):

The 5958 DAT was available on McAfee’s publicly-accessible HTTP and FTP download repositories until at least 1 PM Eastern, when I was checking on them.

The Windows and Mac anti-malware products from McAfee share DAT updates, which provide virus definitions. I was able to update VirusScan for Mac OS X to 5958 with no ill effects in the midst of the developing situation. (The problem only appears to have affected Windows XP systems.) Later, when McAfee had posted a newer update as version 5959, I was also able to download that.

Based on reports I saw on Twitter and the Web, McAfee was overwhelmed by this — particularly its call center and its Web-based customer forums. This allowed a lot of speculation and misinformation — along with humor — to break out.

I’ve saved this undoctored screen shot for a while. I figure I’ll end with it, even though it’s unrelated to the events of April 21.

I had interesting things happen when I ran out of disk space today.

The most notable one was that I saw “Process completed” — or some variant of that — every time I tried to open a Terminal window with a new shell session. I briefly staved it off by specifying Bash as my shell, but then it came right back after opening another tab or two in Terminal. Consulting Google led me to this “Terminal application quits” thread at Apple Discussions. On a lark, I tried deleting /usr/bin/login as one poster suggested. It worked!

…But only for a little while. The problem returned. In the meantime, I had freed up some disk space because I’d realized I couldn’t save files anywhere (“But ~/Pictures is writable!”). Clearly something else had become an issue, because disk space was available.

Then I found another thread, “Terminal’s ’Process Completed’ message and /usr/bin/login,” on Apple Discussions. The more permanent solution from that thread appears to be the removal of corrupted Apple System Log databases. Once I did that and restarted the ASL service, all was well and has stayed that way so far.

Filling up my disk must have corrupted the logs as they were being written or rotated, and led to this cascade failure. Like I said, interesting!

One of the posters in the second Apple Discussions thread indicated that the underlying database corruption issue is addressed in Snow Leopard. However, it seems that you could still see this on Leopard — my experience was with a recently-patched Mac OS X 10.5.8 system.

The new Apple Education Licensing Program replaces the Apple Maintenance Program (AMP) as the primary way to purchase ongoing software upgrade rights for a school, college, or university’s fleet of Macintosh computers. The Apple Education Licensing Program (AELP? or just ELP?) is a yearly, renewable license.

I think this is a big deal because it’s awfully close to what I’ve asked Apple for year after year — especially at venues like WWDC (at least when they have presented the opportunity for giving constructive feedback).

The ELP licensing for Mac OS X is actually a bundle — called the “Mac Software Collection” — of the operating system combined with the iLife and iWork suites. (It aligns with the same bundle of software in the standalone “Mac Box Set.”) I believe that the bundling of iLife is the biggest win, because it provides upgrade rights to software that is bundled with every new Mac but frequently updated. If you are managing a larger group of Macs over several years, the licensing and deployment issues involved with iLife could be complex — moreso because it’s the kind of software that people want on their computers. It also doesn’t hurt that Keynote is included — anecdotally, it appears to sell a lot of Macs in organizations all by itself.

The ability to keep the operating system and core applications from the Mac Software Collection up-to-date across a range of Macs with a single renewable license could be a tremendous savings in administrative overhead.

Organizations must cover 100 percent of their installed base of owned or leased Macs, at least for the Mac Software Collection. This may be a deal-breaker for a number of universities and perhaps other organizations that tend to be decentralized in their operations.

Apple’s other software can also be obtained through ELP, but can be purchased to cover 100 percent of computers at the departmental level. It is possible that the exact nature of the organizational unit is at the organization’s discretion.

ELP allows the flexibility to cover faculty/staff home use as well as students, should the organization elect to pay for that additional coverage.

Each ELP purchase appears to incur a one-time 10 percent enrollment fee. If an organization doesn’t renew for a year but then buys again later, it may be subject to the enrollment fee again. And, if you have a lot of departments seeking Apple’s Pro Apps or IT-related software, those 10 percent charges could add up to significant overhead. I’m not sure if there’s a clear way to allow two or three departments to get the software they want without requiring an entire educational institution’s Macs be covered.

As part of the introduction of ELP, educational institutions are being encouraged to move to the new licensing program before December 13, 2009, through a waiver of the enrollment fee. It appears possible to crossgrade from AMP to ELP, at least if you talk to your Apple account team.

I am not aware whether Apple has rolled out something similar to organizations outside education.

The default installation of Python on Mac OS X Snow Leopard is version 2.6.1. According to the man page for Python on Snow Leopard, Python 2.6 executes as a 64-bit application by default.

If, for some reason, you need to run it as a 32-bit application, this can be changed at the command line:

The preference can be set in either the User or Local filesystem domain in Mac OS X, following the normal precedence rules. To unset it, presumably you would change the boolean to “no” — or perhaps even delete the “Prefer-32-Bit” key.

There is also an environment variable that can override this preference.

After using Acquia Drupal for a while, I took advantage of a trial subscription to the Acquia Network. The network’s services showed me that I had files present in my install that the agent could not account for.

I suspected this was happening because of the way I manage my Acquia Drupal installation with Mercurial. So, I’ve modified my previous process (and updated my instructions) to extract the downloaded tar archive with the —recursive-unlink option. This option appears to successfully remove the contents of every directory before putting new files back into them.

When the archive is extracted in this way, my repository’s working directory shows modified, unknown, and deleted files. This allows me to treat each category of files individually before I commit the changes for a Drupal update as a revision.

$ hg status

The modified files will be tracked normally because they’ve already been added to the Mercurial repository, so I don’t need to do anything special for them.

The unknown files are ones that are completely new, and have not appeared in the same position in a previous revision. They have yet to be tracked by Mercurial, so I have to add them to the repository. To add just those unknown files, then, I have to pick them out from the status listing:

$ hg status --unknown

In order to operate just on those files to add them to the repository, I run a for loop:

This changes the “?” status to “A,” because the files were successfully being tracked by Mercurial.
I use the “—no-status” flag on the “status” command so that just the file paths are printed; the actual status code is not, which is appropriate for the target of the “add” command in the loop.

I do the same basic steps with deleted files. These are files that were in the previous revisions but have been deleted by the —recursive-unlink option from the tar extraction and not replaced with the extraction of the new Acquia Drupal tar archive. If the deleted files had been replaced by the tar extraction, they would either be unchanged (which would not show up in the “status” output) or marked as modified.

To remove the files that are marked as deleted from the repository’s working directory:

However, that may be the same as simply using the following, which I have to explore further:

$ hg remove --after

So, to follow all of these changes in the repository, I run the loop for the uknown files and the loop for the deleted files. The modified files are already tracked, so I don’t need to do anything additional for them. After that, a “commit” will record all of the changes — modifications, additions, and deletions — in the repo.

These commands are based on my current understanding of Mercurial, and they do work for me right now. There could certainly be another better way to do this in one fell swoop — or at least fewer steps. I would welcome that, so if you’re aware of a way, feel free to comment or contact me.

Update: I found that the “hg addremove” command cleanly replaces all of the shell loops I mentioned above. Therefore, I recommend using it instead of the “for” loops I described.

Apache Solr provides a Web service front end for the Apache Lucene indexing and search engine library. Both Solr and Lucene (upon which Solr depends) are Java-based, which has implications for shared Web hosting.

Drupal is an open source CMS, and I happen to use it on a shared Web hosting provider as of this writing. Drupal is gaining support for Apache Solr through a module that has had a lot of input from Acquia (the “Red Hat” of Drupal).

Dries Buytaert of Acquia has some interesting perspective on search for the Web and CMSes in some recent articles on his site. Specifically, he talks about Acquia Search, a Solr-based search service that is being offered to Drupal sites on the Acquia Network. He discusses the advantages afforded by good search capabilities for both visitors to a Drupal Web site and for site administrators.

I’ve used Acquia Search (in beta), and it has been great. It’s very fast compared to the core Drupal Search module. The ability to perform faceted searches, word stemming, spell checking, and more is all tremendous. (You can see it in action in the search field in the site sidebar, as long as my Acquia Network subscription from the beta lasts.)

But Acquia Search part of a larger service offering — the Acquia Network — which ultimately makes it too expensive for me on my personal sites. It’s priced out of reach for me — more costly for one year than two years of Web hosting, domain registrations, and separate e-mail hosting for my domains are today. I think it’s clear that Acquia is aiming at a different market, and that’s fine.

My idle thought, however, is that search by itself is a compelling feature even for small Web sites like mine. It’s as compelling as hosting files, like HTML or PHP or images, or serving databases, like MySQL and PostgreSQL.

If it’s important as Dries notes in his posts — that the search market is so large and growing, and of such universal importance — then great search is a compelling feature to have for many levels of sites. After serving the files and serving the database, it may be the next big service that a Web hosting provider could offer. And today, Web hosting offers a range of pricing (and service levels) to meet various needs.

I could see advertising that for some monthly fee, a Web host offers 55 GB of storage and 550 GB of monthly data transfer and unlimited MySQL databases — and oh, by the way, some reasonable level of indexing/search with Apache Solr and/or Sphinx or whatever. Although I hate to suggest it, search could even be an optional add-on, as many providers treat dedicated IP addresses or SSL or the like.

There may be an additional win, in that separate servers could be optimized for search to offload that processing from the Web server. It could even be something that a Web host contracts out or partners with another to provide — maybe even with a company like Acquia that’s already set up their infrastructure to scale on Amazon EC2.

Especially if other CMSes, such as WordPress, get Solr integration — as with this WordPress Solr plugin — then the case for Web hosts offering something like Solr search gets convincing.

I see a lot of complaints about Belkin SOHO-series KVM (keyboard, video, and mouse) switches. I think many of these complaints are warranted; I’ve used two of these KVMs for a long time and have some familiarity with them.

However, one complaint that does have a workaround covers the mapping of the Mac’s Command and Option keys. For the hybrid PS/2-USB KVMs I have used, you must use a PS/2 keyboard and mouse.

That PS/2 terminal requirement assures that your keyboard is going to be labeled for PC/Windows use. If you connect any Macs, you’ll be frustrated by the key layout of Command and Option. Initially, the Alt key will act like Option, and the Windows key will behave as if it’s Command. This is the opposite of what you’d expect from an Apple keyboard — or another keyboard designed primarily for Mac use.

The good news is that this behavior can be changed, and it applies individually to each KVM port. If you have a Mac on Port 1 and a Windows computer on Port 2, they can each have the settings you’d expect. To do so, switch to the port connecting to a Mac and press Esc-A. This puts that port in the “Mac function” mode. In this mode, PS/2 Alt is Command and PS/2 Windows is Option.

Other keys also change, according to a table from an addendum to the Belkin manual. Given that it was a separate sheet in the box, I’m not surprised that many people have apparently missed it.

To reverse the setting back to the previous function mode, press Esc-Y to disable the remapping. Again, you have to do this on a port-by-port basis.

If you ever switch the computers connected to the ports, you will need to disable this change for each affected port; it by no means updates itself dynamically. That’s why there’s a problem in the first place.

I owe Greg Madore for this tip, as he’s the one who originally found it for me.

Unfortunately, this does not fix another failing of the Belkin SOHO KVMs for my kind of work — namely, the inability to change startup behavior on Macs. (I have not yet seen a KVM with keyboard emulation that consistently allows the use of modifier keys — such as C, T, Option, H, etc. — to change the startup behavior of a Mac. That capability would be extremely handy for KVMs used in technical support scenarios.)

Apparently, I’ve been installing too many applications on my iPod touch. The other day, I got this warning from it while trying to use the App Store application to download a new app: “There is not enough space to download this application. Please delete some photos or videos.”

Trimming the applications list is a lot less satisfying than filling it up.